Product Category

2.5 spacing 3P vertical paste plastic thickness 2.0mm battery connector BC-25-3P-200

Button battery holder is used to load button battery, which is usually welded on PCB board, used to load battery power supply module clock or other consumer electronic products.

Quantity:

Share this:

Inquire

Product Description
Specifications
Certificates

Features:

100% brand new and high quality.

Easy to install and use.

Easy structure, mini body,

Button battery connector, used for loading button battery, generally welded on PCB board, used for module clock power supply.

The utility model comprises a base body, a positive lead part, a negative lead part, a convex bar rib and a positioning seat for fixing and limiting the battery are respectively arranged on the opposite edge of the bottom surface of the base body.

Specifications:

Product Name : BATTERY

Model：BC-25-3P-200

BATTERY SPECIFICATIONS

1.OPERATING TEMPERATUER RANGE IS-40℃ TO 85℃。IT IS USUALLY APPLIED TO ELECTRONIC AND ELECTRICAL

APPLIANCE PRODUCTS.

2.STORAGE TEMPERATURE RANGE：-40～85℃.

ITEM	TEST CONDITIONS	Requirements
TERMINAL STRENGTH	A static force of 300g being applied in one direction on the tip of the terminal for 1 mintue.	There shall be of mechanical and electrical damage.
SOLDERING TEST	The tip of the terminal shall be dipped 2mm in the solder bath within temperature of 230±5℃ for 3s.	Over 75% of the immersed surface was covered by tin .
SOLDERING RESISTANT TEST	Soldering temperature 260±5℃,soldering time 3± 0.5s,immersion depth up to the surface of the board, thickness of PCB 1.6mm. Manual soldering temperature260±5℃, soldering time 3±0.5s,however excessive pressure shall not be applied to the terminal.	Without deformation of case or excessive looseness of electrical properties
HEAT RESISTAN TEST	80 ± 2 ℃ for 96H,test after keeping in normal condition for 30min.	（ 1 ） Contact resistance 200mΩ. （2）insulation resistance 50MΩ min. （3）there shall be no sign of mechanical and electrical damage.
MOISTURE RESISTANT TEST	40±2℃ 90～95% RH for 96H,test after keeping in normal condition for 30min.
COLD RESISTANT TEST	At -40±3℃for 96H,test after keeping in normal condition for 30min.

BATTERY SPECIFICATION .pdf

Product Category

2.5 spacing 3P vertical paste plastic thickness 2.0mm battery connector BC-25-3P-200

Related products

BC battery base vertical patch 68 gold plated 3P board connector BC-1-3P

2.0 Spacing 10P Horizontal Patch BC Basic Battery Base Connector Base B01F-A-L1-10P

2.5 spacing 3P vertical paste plastic thickness 2.0mm battery connector BC-25-3P-200

BC battery holder 4P gold-plated connector 2.0MM spacing vertical patch plastic thickness 1.7MM BC-13-4P

3P gold-plated thickness 2.3 vertical patch BC battery holder connector BC-3-3P

Quick Link

Product

Leave a Message