AC power socket with ear and tail plug with screw hole AC-04 AC power socket with ear and tail plug with screw hole AC-04

Socket, also known as power socket. Socket refers to the socket with one or more circuit wiring which can be inserted, through which various wiring can be inserted. This makes it easier to connect with other circuits. Through the connection and disconnection between the circuit and the copper parts, the connection and disconnection of this part of the circuit can be achieved finally.

Quantity:
Share this:
  • Product Description
  • Specifications
  • Certificates

Features:

100% brand new and high quality.

Easy to install and use.

Easy structure, mini body,

Socket, also known as power socket. Socket refers to the socket with one or more circuit wiring which can be inserted, through which various wiring can be inserted. This makes it easier to connect with other circuits. Through the connection and disconnection between the circuit and the copper parts, the connection and disconnection of this part of the circuit can be achieved finally.

DC power socket is used in the following products and industries

1. Security products, fitness devices, medical devices, computer products and other products industry.

2. Mobile phone, TV, electronic fat scale, rice cooker, DVD, MP3, MP4, sound, microwave oven, electric fan, electronic kitchen scale, electronic body scale, car phone, telephone and other audio-visual products, digital goods and household appliances.

 

 

Specifications:

Product Name :DC&AC JACK

Model:AC-04




AC POWER JACKS SPECIFICATIONS


PRACTICAL TEMPERATURE RANGE :

-10℃~+60℃ (Normal humidity, normal air pressure)



ITEMTEST CONDITIONSSTANDARDS
Terminal push forceThe specimen shall be heated to temperature of 70℃ for 1H,then a staic load of 60N be applied to pins for one minute.
2.5mm. No movement exceeding2.5mm
Driving strength of mouning holes
Using A screw of M3 through the mouning holes to the mold in a torque of 7kgf.
No damage is appeared for holes.
Solderabilit ytest
The top of the terminals shall be dipped 2mm in the solder bath of 230±5℃for 3±5secon-ds.
The area of soldering should be over 75%.
Soldering heat resistance

The top of the terminals shall be dipped 2mm,temperature and duration of dipping:


Soldering type         Temperature        Time

soldering of lead     350℃±5℃       3~5sec

dip soldering            260℃±5℃     5±0.5sec

No abnormalities shall be observed in appearance and operation. the electrical performance of the above item3 shall be assured.
Dry proof

After the test sample is placed at 85 ± 2 ℃ for 96 hours,

Then put it in the normal temperature and humidity environment for 1 hour


Contact resistance 30mΩ max. Deformation orcracks shall not berecognized in molded part
Cold proof

Place the test sample in the environment of - 25 ± 2 ℃ for 96 hours, and then

Test after 1 hour in normal temperature and humidity

Contact resistance 30mΩ max. Deformation orcracks shall not berecognized in molded part
Damp heat

Place the test sample at 40 ± 2 ℃ and 90% ~ 95% humidity

After 96 hours, it was placed in the normal temperature and humidity environment for 1 hour

Carry out the test


Contact resistance 30mΩ max. Deformation orcracks shall not berecognized in molded part
Salt fog Test

Test conditions: temperature 35 ± 2 ℃, salt water concentration 5% ± 1, pH value

5 ~ 7. 2 for 24 hours. After the test, wash the surface of the product with wat-er

Wash and place at room temperature for 1 hour before checking the appearance of the product


Withoutdistinctrust.


×

Contact Us

captcha