D-sub only describes the connection structure, and does not define the function of the whole interface or all pins. The most common are DB25 and de9. The typical applications on personal computers are VGA (DA15 female), parallel port (DB25 female), com serial port (de9 male). These interfaces are being replaced by DVI, HDMI, RJ45 Ethernet port and USB. After the popularity of personal computers, de9 has been misread as DB9. Over time, DB9 has become the alias of de9. It is the same for other D-sub of pin number. Now DB is used more.
Features:
D-sub only describes the connection structure, and does not define the function of the whole interface or all pins. The most common are DB25 and de9. The typical applications on personal computers are VGA (DA15 female), parallel port (DB25 female), com serial port (de9 male). These interfaces are being replaced by DVI, HDMI, RJ45 Ethernet port and USB. After the popularity of personal computers, de9 has been misread as DB9. Over time, DB9 has become the alias of de9. It is the same for other D-sub of pin number. Now DB is used more.
Specifications:
Product Name : D-SUB
Model: HY-DB9FBL01
Technical parameters
Electrical characteristics
A. Contact resistance: ≤ 15m Ω
B. Rated current: 5A
C. Withstand voltage: 1000V
D. Insulation resistance: ≥ 5000m Ω
Materials and surface treatment
A. Pin material and coating: Brass
B. Plastic material: PBT
Working environment temperature: - 40 ℃ ~ + 100 ℃
Material introduction
Packaging and storage
A. Mark: the trademark (code or mark) and production date of the
manufacturer shall be indicated on the productB. Packing: the packing box should be marked with the manufacturer,
product name, model, quantity, production date, moisture-proof,
handle with care and other words. There should be a seal at the
mouth of the box. The packing box is pasted with the certificate,
which should indicate: manufacturer, product name, model,
quantity, inspection department mark, inspection date.
C. Transportation: the packaged products can be transported by any
means of transportation without the direct influence of rain and
snow.
D. Storage: the packaged products should be stored in the warehouse
where the ambient temperature is - 10 ℃ ~ + 40 ℃, the relative
humidity is not more than 80%, and there is no acid, alkaline or
other corrosive gas in the surrounding air.
Product environmental protection information
ROS compliance;
Exemption (meeting EU exemption provisions)
Technology: lead free