Notebook computer industrial control board power socket DC-300 Notebook computer industrial control board power socket DC-300

DC socket is a kind of socket matching with the special power supply for computer display. It is composed of transverse socket, longitudinal socket, insulating base, forked contact shrapnel and directional keyway. Two forked contact shrapnel are located in the center of the base, arranged vertically and horizontally and not connected with each other. One end of the forked contact spring piece is a wiring port, which is exposed on the top of the base cylinder for connecting the input power cord or cable. The other end of the forked contact spring piece is composed of two elastic arms interconnected with the substrate, which is set in the insulated base Jack in the direction of DC plug insertion, and is used for computer display to make it work normally.

Quantity:
Share this:
  • Product Description
  • Specifications
  • Certificates,packaging and transportation

Features:

100% brand new and high quality.

Easy to install and use.

Easy structure, mini body,

DC socket is a kind of socket matching with the special power supply for computer display. It is composed of transverse socket, longitudinal socket, insulating base, forked contact shrapnel and directional keyway. Two forked contact shrapnel are located in the center of the base, arranged vertically and horizontally and not connected with each other. One end of the forked contact spring piece is a wiring port, which is exposed on the top of the base cylinder for connecting the input power cord or cable. The other end of the forked contact spring piece is composed of two elastic arms interconnected with the substrate, which is set in the insulated base Jack in the direction of DC plug insertion, and is used for computer display to make it work normally.

DC socket is divided into two kinds of packaging: SMT chip packaging and dip plug-in packaging.

Application of DC socket

1. Audio and video products: MP3, MP4, DVD. Audio;

2. Digital products: digital camera, digital video camera, etc;

3. Remote control: remote control for vehicle, roll up door and family anti-theft products;

4. Communication products: mobile phone, car phone, telephone, building equipment, PDA, etc;

5. Household appliances: TV, microwave oven, rice cooker, electric fan, electronic body scale, electronic fat scale, electronic kitchen scale, etc;

6. Security products: Video walkie talkie, monitor, etc;

7. Toys: electronic toys, etc;

8. Computer products: camera, recorder, etc;

9. Fitness equipment: running machine, massage chair, etc;

10. Medical equipment: sphygmomanometer, thermometer, hospital call system, etc.

 

 

Specifications:

Product Name :DC&AC JACK

Model:DC-300

Ratings: 30V DC, 3A (effective value)

Contact Resistance:≤0.03Ω     Insulation Resistance:≥100MΩ

Dielectric voltage proof:500V AC(50HZ )/min

Insertion/Withdrawal Force: 3-20N

Operation life:Average fault-free life 5,000 times

DC-300-.jpg

DC POWER JACKS SPECIFICATIONS


PRACTICAL TEMPERATURE RANGE :

-10℃~+60℃ (Normal humidity, normal air pressure)




ITEM
TEST CONDITIONS
PERFORMANCE 
SOLDERABILITY   TEST 
THE TOP OF THE TERMINALS SHALL BE DIPPED
2mm IN THE SOLDER BATH OF 230±5 FOR
3±0.5 SECONDS. 
THE AREA OF SOLDERING.
SHOULD BE OVER 75%. 
RESISTANCE TO
SOLDERING HEAT TEST 
SOLDER BATH METHOD:
SOLDER TEMPERATURE 245±5 IMMERSIO-N TIME 3±0.5 SEC IMMERSION DEPTH UP TO THE SURFACE OF THE BOARD THICKNESS OF PRINTED WIRING BOARD 1.6mm DIMENS-IONS OF COMPONENT HOLES IN THE PRIN-TED WIRING BOARD SHALLBEING ACCORD-ANCE  WITH THOSE SPECIFIED IN THIS SPECIFICATION. 
WITHOUT DEFORMATION OF
CASE OR EXCESSTVE
LOOSENESS OF TEMINALS
ELEXTRICAL
CHARACTERISTICS SHALL BE
SATISFIED. 
HEAT TEST
THE JACK SHALL BE STORED AT A
TEMPERATURE OF 60±5 FOR 96 HOURS
AND THEN IT SHALL BE SUBJECTED TO THE
CONTROLLED RECOVERY CONDITIONS FOR
1 HOUR AFTER WHICH MEASUREMENT
SHALL BE MADE. 
THERE SHALL BE NO DAMAGE
ON APPEARANCE. MECHANICAL
AND ELECTRICAL
CHARACTERISTICS SHALL BE
SATISFIED. 
COLD TEST
THE JACK SHALL BE STORED AT A
TEMPERATURE OF -10±5 FOR 96 HOURS.
AND THEN IT SHALL BE SUBJECTED TO THE
CONTROLLED RECOVERY CONDITIONS FOR
1 HOUR AFTER WHICH MEASUREMENT
SHALL BE MADE. 

THERE SHALL BE NO DAMACE
ON APPEARANCE. MECEANICAL
AND ELECTRICAL
CHARACTERISTICS SHALL BE
STISFIED. 

HIJMIDITY
TEST 
THE JACK SHALL BE STORED AT A
TEMPERATURE OF 40±2 AND A HUMIDITY
OF 90% TO 96% FOR 96 Hr THEN THE JACK
SHALL BE MAINTAINED AT STANDARD
ATMOSPHERIC CONDITION FOR 1 Hr FOR
OTHER PROCEDURES. 

THERE SHALL BE NO DAMACE
ON APPEARANCE. MECEANICAL
AND ELECTRICAL
CHARACTERISTICS SHALL BE
STISFIED. 


×

Contact Us

captcha