S terminal base / industrial control panel terminal interface base DIN-805 S terminal base / industrial control panel terminal interface base DIN-805

S-terminal (English: S-Video), in which s is short for "separate". Also known as Y / C (or mistakenly referred to as S-VHS or "super video"). It is an analog signal that divides the video data into two separate signals (brightness and chroma) for transmission. Unlike composite video, it packs all the signals into a whole and sends them.

Quantity:
Share this:
  • Product Description
  • Specifications
  • Certificates

Features:

100% brand new and high quality.

Easy to install and use.

Easy structure, mini body,

S-terminal (English: S-Video), in which s is short for "separate". Also known as Y / C (or mistakenly referred to as S-VHS or "super video"). It is an analog signal that divides the video data into two separate signals (brightness and chroma) for transmission. Unlike composite video, it packs all the signals into a whole and sends them.

S - Ⅵ deo terminal, also known as the light and color separation terminal, is a professional video standard interface, which only transmits video signals and has nothing to do with audio. S does not mean separation. The chroma signal C and luminance signal Y of the video signal are separated and transmitted in different channels respectively, so as to reduce the "separation" and "synthesis" process in the image transmission process, reduce the loss in the conversion process, reduce the mutual interference between the signals, and reduce the mutual interference between the luminance and chroma in the video program output, In order to get better display effect. At present, the most widely used s terminal interface with better output effect.

 

Specifications:

Product Name : MINI DIN

Model: DIN-805



MINI DIN  SPECIFICATIONS


  Practical temperature range: 

-25℃~+70℃ (Normal humidity, normal air pressure)



Itrm Test ConditionRequirement
TerminalStrength
Apply 5N static load for 10 secto pull every direction on thefront of terminal
Noobviouscrack and poorcontacting on theterminal ,butacceptdeformation
Solderab-ility
Put the front of jointing into thesolding fluxWelding temperature : 235±5 ℃ Steeping tin time : 3 + 0 . 5S Immersion depth no more than1 / 2 thickness of P C . 

Contaminatingtin area ≥90%


Soldingfluxmust notflow tothe PCboardsurface

Resistance to Soldering heatPut the terminal into tl 6mmP C . board and solderingFluxWelding temperature : 255 ± 5℃ Steeping tin time : 5±SNo damagedeformation andabnormaltouchingofInsulator
HumidIty test
Put products into the constanttenperature and humidity containerthich temperature is 40 ± 2 ℃ , andhumidity is 90-95 % o for 96hours . test after 24 hours in theconstant temperature and humidity .

Insulating resistance:≥10MΩ

Contact resi stance:≤30mΩ

Withstandvol tage : 300VAC / min

Saltmisttest

Put product into the salt mist boxwhich temperature is 35±2 ℃ and sodium chloride liquor is 5%±0.1% to spray

 for 8 hours then cleanby water to observe

Surface of parts shall notobvious must
Temperature Cycling testPut produets into the constanttemperaturecontainerwhichtemperature is -25 ± 2 ℃ for 30minutes and then displace toconstant temperature is 70± 2± for30 minutes . by 5 times cycles , testaf ter 2 hour in the constanttemperature and humidit

Insulatingresistance:≥100MΩ

WithstandVoltage500VAC / min


Life testOn the condition of on-loading pull andpush 1000 times , 10-18 times / min
Contactresi stance:≤50mΩ


×

Contact Us

captcha