3 * 6 * 6.8 high temperature resistant 2-pin TACT SWITCH HY-1101WS-H6.8 3 * 6 * 6.8 high temperature resistant 2-pin TACT SWITCH HY-1101WS-H6.8

Tact switch (commonly referred to as tactile switch) can be found on almost all computing appliances. Some of such appliances include keyboards, mobile phones, mice, TV sets, set-up boxes, monitors, cell phones and even children’s toys. etc.Also a great component for DIY.

Quantity:
Share this:
  • Product Description
  • Specifications
  • Certificates

Features:

100% brand new and high quality.

Easy to install and use.

Easy structure, mini body,

Widely used to control operation of many power electronic projects, Tact switch (commonly referred to as tactile switch) can be found on almost all computing appliances.

Some of such appliances include keyboards, mobile phones, mice, TV sets, set-up boxes, monitors, cell phones and even children’s toys. etc.Also a great component for DIY.

Specifications:

Product Name :Tact switch

Model:HY-1101WS-H6.8

Contact arrangement: 1 pole, 1 throw

Ratings: 12V DC, 50mA (effective value)

Contact Resistance:≤30mΩ     Insulation Resistance:≥100MΩ

Dielectric voltage proof:250V AC(50HZ or 60HZ)/1min

Full Travel:0.15±0.05mm       Operating Force:120gf±50gf

Operation life:Average fault-free life :50,000 times


SOLDERING CONDITIONS:

Hand soldering:       Please practice according to below conditions:

                                (1) Soldering temperature: 350℃ Max.

                                (2) Continuous soldering time: 5 s Max.

 

Automatic soldering:In case the automatic flow soldering is to be used

                                 (1) Preheat -------------- 150℃ ~ 175℃, 40 ~ 80 sec

                                 (2)Peak temperature ----- 260℃ (max)

                                 (3)  Soldering area temperature ------ 260℃, 1 ~ 4 sec, 2 times (max)



HY-1101WS-H6.8-.jpg

SPECIFICATIONS

Operating Temperature Range:

-20℃~70℃(Normal humidity, normal air pressure)


Storage Temperature Range

-30℃~80℃(Normal humidity, normal air pressure)


Contact arrangement: 1 pole, 1 throw


ELECTRICAL SPECIFICATION

ITEM

 

TEST CONDITIONS


REQUIREMENTS
Resistance to low
temperature
Following the test set forth below the
sample shall be left in normal temperature
and humidity conditions for 1 h before
measurements are made:
(1) Temperature : -30±2℃
(2) Time: 96h

Contact resistance: ≤200mΩ
Heat resistance
Following the test set forth below
the sample shall be left in normal
temperature and humidity conditions for 1
h before measurements are made:
(1) temperature:80±2℃
(2) time: 96h 
Contact resistance: ≤200mΩ
Salt Mist
The switch shall be checked after
following test:
(1)temperature: 35℃±2℃
(2)salt solution : 5±1%(solids bymass)
(3)Time: 8h±1 hour
After test, salt deposit shall be removed
by running water. 
No remarkable corrosion shall
be recognized in metal part.




×

Contact Us

captcha