Product Category

S terminal DIN socket 5p keyboard mouse PS interface base HY-504

S-terminal (English: S-Video), in which s is short for "separate". Also known as Y / C (or mistakenly referred to as S-VHS or "super video"). It is an analog signal that divides the video data into two separate signals (brightness and chroma) for transmission. Unlike composite video, it packs all the signals into a whole and sends them.

Quantity:

Share this:

Inquire

Product Description
Specifications
Certificates

Features:

100% brand new and high quality.

Easy to install and use.

Easy structure, mini body,

Specifications:

Product Name : MINI DIN

Model：HY-504

Ratings: 12 V DC, 1 A (effective value)

Contact Resistance: ≤30mΩ Insulation Resistance:≥100MΩ

Dielectric voltage proof: 250V AC(50HZ )/min

Insertion/Withdrawal Force: 5-35N

Operation life:Average fault-free life 5,000 times

MINI DIN SPECIFICATIONS

Practical temperature range:

-25℃~+70℃ （Normal humidity, normal air pressure）

Itrm	Test Condition	Requirement
TerminalStrength	Apply 5N static load for 10 secto pull every direction on thefront of terminal	Noobviouscrack and poorcontacting on theterminal ,butacceptdeformation
Solderab-ility	Put the front of jointing into thesolding fluxWelding temperature : 235±5 ℃ Steeping tin time : 3 + 0 . 5S Immersion depth no more than1 / 2 thickness of P C .	Contaminatingtin area ≥90% Soldingfluxmust notflow tothe PCboardsurface
Resistance to Soldering heat	Put the terminal into tl 6mmP C . board and solderingFluxWelding temperature : 255 ± 5℃ Steeping tin time : 5±S	No damagedeformation andabnormaltouchingofInsulator
HumidIty test	Put products into the constanttenperature and humidity containerthich temperature is 40 ± 2 ℃ , andhumidity is 90-95 % o for 96hours . test after 24 hours in theconstant temperature and humidity .	Insulating resistance：≥10MΩ Contact resi stance：≤30mΩ Withstandvol tage : 300VAC / min
Saltmisttest	Put product into the salt mist boxwhich temperature is 35±2 ℃ and sodium chloride liquor is 5%±0.1% to spray for 8 hours then cleanby water to observe	Surface of parts shall notobvious must
Temperature Cycling test	Put produets into the constanttemperaturecontainerwhichtemperature is -25 ± 2 ℃ for 30minutes and then displace toconstant temperature is 70± 2± for30 minutes . by 5 times cycles , testaf ter 2 hour in the constanttemperature and humidit	Insulatingresistance：≥100MΩ WithstandVoltage500VAC / min
Life test	On the condition of on-loading pull andpush 1000 times , 10-18 times / min	Contactresi stance：≤50mΩ