MICRO SWITCH SPECIFICATIONS
MICRO SWITCH SPECIFICATIONS
Characteristics（特点）
1. Up to 10A 250VAC （最高容量可达 10A 250VAC）
2. Long life (寿命长)
Mechanical: up to 30 million times
(机械性:可达3000万次)
Electrical:(电气性:) More than 50000 times (10a 250VAC)
5万次以上(10A 250VAC）
More than 100000 times (5a 250VAC)
10万次以上(5A 250VAC)
More than 200000 times (3a 250VAC)
20万次以上(3A 250VAC）
3. The precision of OP is high, and the button type can reach 8.4 ± 0.25mm.(动作位置(OP)精度高按钮型可达8.4±0.25mm)
4. It has passed CQC and CE certification
(已通过CQC、CE认证)
5. ROHS compliance
(符合ROHS指令)
Application(用途）
1. High capacity household appliances (heater, electric blanket, rice cooker, electric kettle, iron, vacuum cleaner, etc.).
（高容量的用途家用电器(取暖器、电热毯、电饭煲、电热水壶、熨斗、吸尘器等)。）
2. Long life uses（长寿命用途）
Office equipment (copier, printer, fax machine), vending machine, measuring instrument, audio equipment, etc.
（办公设备(复印机、打印机、传真机)、自动售货机、测量仪器、音响设备等。）
Rating and performance overview（额定值及性能概述）
1. Allowable operating speed(允许操作速度)：
0.1mm-1m/s (button type) （0.1mm-1m/秒(按钮型））
2.Allowable on-off frequency(允许通断频率)
Mechanical(机械性)：400 times / min
Electrical property( 电气性)：30 times / min
3.Insulation resistance(绝缘电阻)：
Above 100MΩ (detected by DC500v insulation resistance meter)
(100MΩ以上(DC500V绝缘电阻计检测))
4.Contact resistance (initial value))(接触电阻(初始值）):
OF 1.47N below 30mΩ; OF 0.49N below 50mΩ
(OF1.47N型30mΩ以下;OF0.49N型50mΩ以下）
5.Anti vibration misoperation(耐振动性 误动作):
10-55hz double amplitude 1.5mm contact opening (less than 1ms)
(10-55Hz双振幅1.5mm触点开离1ms以下)
6. Impact resistance(耐冲击性):
OF1.47N maximum 300 m/s²: OF 0.49N maximum 200 m/s²
（0F1.47N型最大300m/s²:OF0.49N型最大200m/s²）
7.life(寿命)
Mechanical life（机械寿命）：
More than 30 million times (60 times / min)
（3,000万次以上 （60次/分钟)）
Electrical life（电气寿命）：
10A, more than 50000 times;
5A, 3A, more than 200000 times (30 times / min)
(10A,5万次以上; 5A,3A,20万次以上(30次/分钟）)
8.Operating environment temperature and humidity（使用环境温度、湿度）:
25 ~ + 85 ℃ (no freezing and condensation) below 85% RH (+ 5-35 ℃)
(25~+85℃(不结冰、不凝露)85%RH以下(+5-35℃))
9.Breakdown voltage withstand（耐击穿电压）:
Between unconnected terminals: ac1.000v50/60hz1min
Between terminals and grounding, between non voltage metal parts and terminals: ac1.500v50/60hz1min
(非连接端子之间:AC1.000V50/60Hz1分钟
各端子与接地间,在无电压金属件与各端子之间:AC1.500V50/60Hz1分钟)
