Vertical 8-pin patch toggle switch 3-shift toggle limit switch MSK-1155S Vertical 8-pin patch toggle switch 3-shift toggle limit switch MSK-1155S

The toggle switch is to switch on or off the circuit by turning the switch handle, so as to achieve the purpose of switching the circuit.

Quantity:
Share this:
  • Product Description
  • Specifications
  • Certificates

Features:

100% brand new and high quality.

Easy to install and use.

Easy structure, mini body,

The toggle switch is to switch on or off the circuit by turning the switch handle, so as to achieve the purpose of switching the circuit. The commonly used varieties of toggle switch include single pole double position, single pole three position, double pole double position and double pole three position, etc. it is generally used in low-voltage circuit, with the characteristics of flexible sliding block action and stable and reliable performance. The toggle switch is mainly used in various instruments / instrument equipment, various electric toys, fax machines, audio equipment, medical equipment, beauty equipment, and other electronic product fields.

 

Specifications:

Product Name :SLIDE SWITCH

Model:MSK-1155S


SLIDE SWITCH  CHARACTERISTICS


   PRACTICAL TEMPERATURE RANGE
   -16℃- +60℃. (Normal humidity, normal air pressure)


   Storage Temperature Range

   -20℃~65℃     (Normal humidity, normal air pressure)


ITEM
TEST CONDITIONS 
PERFORMANCE
TERMINAL
STRENGTH 

A STATIC LOAD OF 300gf SHALL BE APPLIED
TO THE TERMINAL FOR 15 SEC .IN ANY DIRECTION 

ELECTRICAL  CHARACTERISTICS
SHALL BE SATISFIED
WITHOUT DAMAGE OR
EXCESSIVE LOOSENESS OF
TERMINALS. 
DISPLACEMENT
OF ACTUATOR
(KNOB) 

A STATIC LOAD OF 10 N (1Kgf)
SHALL BE APPLIED TO THE TOP OF
THE ACTUATOR (KNOD) AND THEN
DISPLACEMENT SHALL BE
MEASURED TO THE DIRECTION OF
THE ARROW. 

THE LEVER SHALL HAVE NO SERIOUS
DEFORMATION AND FUNCTION NORMALLY. 
LIFE  TEST
ENDURANCE WITHOUT LOADING:
A SWITCH SHALL BE SUBJECTED TO 10,000
CYCLES AT A SPEED OF 15 TO 18 CYCLES
PER MINUTE WITHOUT LOADING. 

(1) CONTACT RESISTANCE 100mΩ MAX.
(2) INSULATION RESISTANCE 50M Ω
MIN. 
(3) WITHSTAND VOLTAGE
AC 500V,1 MINUTE.AC 500V 1 分钟
(4) OPERATING FORCE ± 30% INITIAL
VALUE.
(5) WITHOUT DAMAGE TO PARTS ARCING OR
BREAKDOWN ETC.

SOLDERABILITY TEST 

THE TOP OF THE TERMINALS SHALL BE
DIPPED 2mm IN THE SOLDER BATH OF 230±
10 FOR 2±0.5 SECONDS. 

THE AREA OF SOLDERING.
SHOULD BE OVER 75%. 

RESISTANCE TO
SOLDERING  HEAT TEST 

SOLDER BATH METHOD:
SOLDER TEMPERATURE 250 ± 10 
IMMERSION TIME 2 ± 0.5 SEC IMMERSION
DEPTH UP TO THE SUPFACE OF THE BOARD
THICLNESS OF PRINTED WIRING BOARD
1.6mm DIMENSIONS OFCOMPONENT HOLES I-N THE PRINTED WIRING BOARD SHALL BEIN-G ACCORDANCE WITH THOSE SPECIFIED IN
THIS SPECIFICATION. 

WITHOUT DEFORMATION OF CASE OR EXCES-SIVE
LOOSENESS OF TEMINALS ELECTRICAL
CHARACTERISTICS SHALL BE SATISFIED.

HUMIDITY
TEST 
THE SWITCH SHALL BE STORED AT A TEMPERATUREOF 40±
2℃ AND A HUMIDITY OF 90% TO 95% FOR 96 HOURS .THEN
THE SWITCH SHALL BE MAINTAINED AT STANDARD
ATMOSPHERIC CONDITION FOR 1 HOUR AFTER WHICH
MEASUREMENT SHALL BE MADE.
THERE SHALL BE NO
DEFORMATION OR CRACKS
IN MOLDED PART. 


×

Contact Us

captcha